RKALC Technical Note

Punching shear in flat slabs

A practical guide for Australian structural engineers preparing for the proposed AS 3600:2026 punching shear provisions.

Public comment draft

From the first perimeter to the last reinforcement row

The note explains how the proposed method treats control perimeters, concurrent shear and moment transfer, and the concrete check beyond the reinforcement. Eurocode 2:2023 figures help explain the geometry. The Australian draft governs the checks discussed in the note.

Inside the note

Worked examples and detailing

Published 13 November 2026 · Revision 0

  • A clause-referenced design flowchart covering the basic, reinforced and outer perimeters.
  • Compact and elongated internal column examples comparing the 2018 torsion-strip method with the draft under the same factored actions.
  • Wall-end punching checks using local tip actions, with one-way shear considered along the intervening wall.
  • Practical observations on thin slabs, wet-area set-downs, fitment cover and fire axis distance.